Last updated: October 2026
Quick answer
Unley and its neighbours Parkside, Fullarton, Goodwood, Hyde Park and Malvern are leafy inner-south suburbs of character villas, renovated cottages and tidy streets. Adelaide Epoxy installs garage, studio and workshop epoxy floors in Unley and the surrounding area, with careful access planning for narrow driveways and close neighbours.
Epoxy flooring in the inner south
Unley Road is one of Adelaide's classic shopping strips, flanked by streets of bluestone and brick villas, Edwardian homes and later infill. Parkside, Fullarton, Malvern, Hyde Park and Goodwood add leafy residential blocks to the mix. Many garages are single, detached and tucked behind the house along a narrow driveway, and some have been converted into studios, offices or workshops.
Converted garages and studios
A converted garage is not the same as a standard car bay. If the room has been insulated, lined or plumbed for a different use, the floor can be a thin, level, indoor slab that is part of a heated or cooled space. In those cases we discuss odour, ventilation and low-VOC options, and we sometimes recommend a thinner decorative finish with a clear topcoat. The result can be a seamless, polished-concrete style surface without the cost of full concrete polishing.
If you are deciding between a polished slab and an epoxy finish, the comparison in epoxy versus polished concrete sets out cost, maintenance, repairs and look.
Narrow driveways and heritage streets
Narrow driveways limit equipment size, so we plan around the largest grinder and extractor that will fit. Streets with street-tree canopies and heritage overlays also restrict vehicle parking and noise. We schedule, stage materials and clean up with those restrictions in mind and discuss them at the free visit.
Older properties may have thin or uneven slabs poured many decades ago. A patchy or rough surface is handled by grinding and, where needed, a skim or fill before the primer. Over-optimistic quotes that skip these steps are the ones that usually fail.
Choosing a finish that suits a character home
Unley customers often care how a floor looks from the doorway as much as how it performs under tyres. Muted blends in warm greys, slate and sandstone tones sit quietly in a heritage setting. Dark metallic floors suit contemporary renovations and studios. We bring samples to the site visit so you can see them next to your walls and joinery.
If you are unsure whether to go for the subtle speckle of flake or the marble-like look of metallic epoxy, the comparison guide is a good starting point.
Everyday care
Inner-south garages often double as bike storage and laundry space, so wet shoes and bike tyres are a daily event. Sweep grit away regularly and clean with a neutral detergent; avoid abrasive pads and solvent cleaners. A good topcoat will resist household chemicals, but prolonged exposure to hot tyres or harsh products can dull any surface.
Typical Unley-area projects
- Single detached garages reached along narrow side driveways.
- Garage-to-studio conversions needing a low-odour system.
- Laundry and back-of-house floors that need a seamless surface.
- Renovation projects in villas where the garage floor is the last job.
- Small retail back rooms on Unley and Goodwood Roads.
Goodwood, Hyde Park and Fullarton nearby
Goodwood Road and King William Road bring a stream of cafes, small shops and offices, and the streets behind them are quiet and residential. Hyde Park and Fullarton have established gardens, brick bungalows and some modern townhouses that replaced older houses. Our work across these suburbs is mostly small and meticulous: a single garage, a workshop at the back of the block, or a laundry and utility room.
Timing around a household
Inner-south households are often busy, with commutes, school drop-offs and home offices. We schedule the noisy grinding stage when it suits you, keep the walkway to your front door clear and use floor protection in adjoining rooms. When the job is finished, we run through care instructions and answer any questions about what you can put back in the garage first.
Looking after a feature floor in a heritage home
Once the floor is in, a few habits protect it. Use felt or rubber pads under bike stands and workbench legs, wipe up spills promptly and sweep rather than dragging gritty boots across the floor. If the garage doubles as a studio, consider a washable mat in the area where chairs move constantly, because rolling chair wheels are among the toughest things you can ask of a decorative topcoat.
Frequently asked questions
Do you work in Parkside, Fullarton and Malvern as well as Unley?
Yes. We service the inner south as part of our Adelaide coverage.
Can you coat the floor of a converted garage?
Yes. We consider ventilation, odour and the room's use before choosing a product.
Is epoxy a good alternative to polished concrete?
It can be, especially where the slab is patchy or the surface is rough. We explain the differences in a dedicated guide.
Keep reading
Ready to talk about your project? Call or text 0421 443 213, Monday to Saturday, 7:00 AM to 8:00 PM, or use the free quote form.
Call 0421 443 213